The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Dans cet article, les propriétés nouvellement découvertes des séquences pseudo-ternaires de registre à décalage de longueur maximale (séquences M pseudo-ternaires) sont décrites. En particulier, les propriétés d'équilibre, la distribution des longueurs d'exécution, les propriétés de corrélation croisée et les relations de décimation sont présentées. La séquence M pseudo-ternaire est obtenue en soustrayant la version décalée sur une puce de la séquence M de valeur {+1,-1}. De plus, dans cet article, les performances du système à spectre étalé à séquence directe (DS/SS) utilisant la séquence M pseudo-ternaire sont analysées. Dans l'évaluation des performances, les performances d'erreur de suivi (gigue) et les performances de taux d'erreur binaire (BER) qui prennent en compte la gigue dans un système DS/SS avec une DLL non cohérente de séquence M pseudo-ternaire sont évaluées. L'utilisation de la séquence M pseudo-ternaire au lieu des séquences M conventionnelles peut améliorer les performances d'erreur de poursuite d'environ 2.8 [dB]. De plus, le BER du système DS/SS utilisant la séquence M pseudo-ternaire est supérieur d'environ 0.8 [dB] à celui utilisant la séquence M de valeur {+1,-1}.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copier
Ryo ENOMOTO, Hiromasa HABUCHI, Koichiro HASHIURA, "Performance of DS/SS System Using Pseudo-Ternary M-Sequences" in IEICE TRANSACTIONS on Fundamentals,
vol. E93-A, no. 11, pp. 2299-2306, November 2010, doi: 10.1587/transfun.E93.A.2299.
Abstract: In this paper, newly-found properties of the pseudo-ternary maximum-length shift register sequences (pseudo-ternary M-sequences) are described. In particular, the balance properties, the run-length distribution, the cross-correlation properties, and the decimation relationships are shown. The pseudo-ternary M-sequence is obtained by subtracting the one-chip shifted version from the {+1,-1}-valued M-sequence. Moreover, in this paper, performances of the direct sequence spread spectrum (DS/SS) system using the pseudo-ternary M-sequence are analyzed. In the performance evaluation, tracking error performance (jitter) and bit error rate (BER) performance that takes the jitter into account in DS/SS system with a pseudo-ternary M-sequence non-coherent DLL are evaluated. Using the pseudo-ternary M-sequence instead of the conventional M-sequences can improve the tracking error performance about 2.8 [dB]. Moreover, BER of the DS/SS system using the pseudo-ternary M-sequence is superior about 0.8 [dB] to that using the {+1,-1}-valued M-sequence.
URL: https://global.ieice.org/en_transactions/fundamentals/10.1587/transfun.E93.A.2299/_p
Copier
@ARTICLE{e93-a_11_2299,
author={Ryo ENOMOTO, Hiromasa HABUCHI, Koichiro HASHIURA, },
journal={IEICE TRANSACTIONS on Fundamentals},
title={Performance of DS/SS System Using Pseudo-Ternary M-Sequences},
year={2010},
volume={E93-A},
number={11},
pages={2299-2306},
abstract={In this paper, newly-found properties of the pseudo-ternary maximum-length shift register sequences (pseudo-ternary M-sequences) are described. In particular, the balance properties, the run-length distribution, the cross-correlation properties, and the decimation relationships are shown. The pseudo-ternary M-sequence is obtained by subtracting the one-chip shifted version from the {+1,-1}-valued M-sequence. Moreover, in this paper, performances of the direct sequence spread spectrum (DS/SS) system using the pseudo-ternary M-sequence are analyzed. In the performance evaluation, tracking error performance (jitter) and bit error rate (BER) performance that takes the jitter into account in DS/SS system with a pseudo-ternary M-sequence non-coherent DLL are evaluated. Using the pseudo-ternary M-sequence instead of the conventional M-sequences can improve the tracking error performance about 2.8 [dB]. Moreover, BER of the DS/SS system using the pseudo-ternary M-sequence is superior about 0.8 [dB] to that using the {+1,-1}-valued M-sequence.},
keywords={},
doi={10.1587/transfun.E93.A.2299},
ISSN={1745-1337},
month={November},}
Copier
TY - JOUR
TI - Performance of DS/SS System Using Pseudo-Ternary M-Sequences
T2 - IEICE TRANSACTIONS on Fundamentals
SP - 2299
EP - 2306
AU - Ryo ENOMOTO
AU - Hiromasa HABUCHI
AU - Koichiro HASHIURA
PY - 2010
DO - 10.1587/transfun.E93.A.2299
JO - IEICE TRANSACTIONS on Fundamentals
SN - 1745-1337
VL - E93-A
IS - 11
JA - IEICE TRANSACTIONS on Fundamentals
Y1 - November 2010
AB - In this paper, newly-found properties of the pseudo-ternary maximum-length shift register sequences (pseudo-ternary M-sequences) are described. In particular, the balance properties, the run-length distribution, the cross-correlation properties, and the decimation relationships are shown. The pseudo-ternary M-sequence is obtained by subtracting the one-chip shifted version from the {+1,-1}-valued M-sequence. Moreover, in this paper, performances of the direct sequence spread spectrum (DS/SS) system using the pseudo-ternary M-sequence are analyzed. In the performance evaluation, tracking error performance (jitter) and bit error rate (BER) performance that takes the jitter into account in DS/SS system with a pseudo-ternary M-sequence non-coherent DLL are evaluated. Using the pseudo-ternary M-sequence instead of the conventional M-sequences can improve the tracking error performance about 2.8 [dB]. Moreover, BER of the DS/SS system using the pseudo-ternary M-sequence is superior about 0.8 [dB] to that using the {+1,-1}-valued M-sequence.
ER -