The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
L'invention concerne un coupleur microruban à haute directivité supprimant le couplage de fuite avec un circuit d'annulation d'un diviseur Wilkinson. Le coupleur présenté utilise un circuit d'annulation entre un port de couplage et un port d'isolation du coupleur microruban classique pour améliorer l'isolation. Le circuit d'annulation se compose du diviseur Wilkinson, de l'atténuateur à plusieurs étages et de la ligne de déphasage. La fréquence permettant d'améliorer l'isolation est contrôlée par les atténuateurs. Comme la directivité est améliorée sans modification du coupleur classique, le circuit d'annulation peut être appliqué aux coupleurs classiques fabriqués. La directivité mesurée du coupleur 1/18 λ présenté est améliorée de 4.8 dB à 43.0 dB à 2.6 GHz, par rapport au coupleur 1/4 λ conventionnel avec couplage -20 dB. Simultanément, la bande passante relative de 27.4 % avec une directivité de 20 dB est atteinte.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copier
Kazuhisa YAMAUCHI, Akira INOUE, Moriyasu MIYAZAKI, "High Directivity Coupler Suppressing Leak Coupling with Cancellation Circuit of Wilkinson Divider" in IEICE TRANSACTIONS on Electronics,
vol. E93-C, no. 7, pp. 1032-1037, July 2010, doi: 10.1587/transele.E93.C.1032.
Abstract: A high directivity microstrip coupler suppressing leak coupling with a cancellation circuit of a Wilkinson divider is presented. The presented coupler utilizes a cancellation circuit between a coupling port and an isolation port of the conventional microstrip coupler to enhance the isolation. The cancellation circuit consists of the Wilkinson divider, the multistage attenuator, and the phase offset line. The frequency to enhance the isolation is controlled by the attenuators. As the directivity is improved without the modification of the conventional coupler, the cancellation circuit can be applied to the fabricated conventional couplers. The measured directivity of the presented 1/18 λ coupler is improved from 4.8 dB to 43.0 dB at 2.6 GHz, compared with the conventional 1/4 λ coupler with -20 dB coupling. Simultaneously, the 27.4% relative bandwidth with the 20 dB directivity is achieved.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.E93.C.1032/_p
Copier
@ARTICLE{e93-c_7_1032,
author={Kazuhisa YAMAUCHI, Akira INOUE, Moriyasu MIYAZAKI, },
journal={IEICE TRANSACTIONS on Electronics},
title={High Directivity Coupler Suppressing Leak Coupling with Cancellation Circuit of Wilkinson Divider},
year={2010},
volume={E93-C},
number={7},
pages={1032-1037},
abstract={A high directivity microstrip coupler suppressing leak coupling with a cancellation circuit of a Wilkinson divider is presented. The presented coupler utilizes a cancellation circuit between a coupling port and an isolation port of the conventional microstrip coupler to enhance the isolation. The cancellation circuit consists of the Wilkinson divider, the multistage attenuator, and the phase offset line. The frequency to enhance the isolation is controlled by the attenuators. As the directivity is improved without the modification of the conventional coupler, the cancellation circuit can be applied to the fabricated conventional couplers. The measured directivity of the presented 1/18 λ coupler is improved from 4.8 dB to 43.0 dB at 2.6 GHz, compared with the conventional 1/4 λ coupler with -20 dB coupling. Simultaneously, the 27.4% relative bandwidth with the 20 dB directivity is achieved.},
keywords={},
doi={10.1587/transele.E93.C.1032},
ISSN={1745-1353},
month={July},}
Copier
TY - JOUR
TI - High Directivity Coupler Suppressing Leak Coupling with Cancellation Circuit of Wilkinson Divider
T2 - IEICE TRANSACTIONS on Electronics
SP - 1032
EP - 1037
AU - Kazuhisa YAMAUCHI
AU - Akira INOUE
AU - Moriyasu MIYAZAKI
PY - 2010
DO - 10.1587/transele.E93.C.1032
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E93-C
IS - 7
JA - IEICE TRANSACTIONS on Electronics
Y1 - July 2010
AB - A high directivity microstrip coupler suppressing leak coupling with a cancellation circuit of a Wilkinson divider is presented. The presented coupler utilizes a cancellation circuit between a coupling port and an isolation port of the conventional microstrip coupler to enhance the isolation. The cancellation circuit consists of the Wilkinson divider, the multistage attenuator, and the phase offset line. The frequency to enhance the isolation is controlled by the attenuators. As the directivity is improved without the modification of the conventional coupler, the cancellation circuit can be applied to the fabricated conventional couplers. The measured directivity of the presented 1/18 λ coupler is improved from 4.8 dB to 43.0 dB at 2.6 GHz, compared with the conventional 1/4 λ coupler with -20 dB coupling. Simultaneously, the 27.4% relative bandwidth with the 20 dB directivity is achieved.
ER -