The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Des nanoparticules de sulfure de cuivre ont été préparées avec succès par ablation laser dans un liquide. Les poudres de CuS dans de l'eau désionisée ont été irradiées avec un laser pulsé nanoseconde (Nd: YAG, SHG) pour préparer des nanoparticules. Les nanoparticules préparées ont été étudiées par microscopie électronique à balayage (MEB), diffusion dynamique de la lumière (DLS) et fluorospectromètre. Selon les résultats du SEM et du DLS, la taille des particules primaires et secondaires a diminué avec l'augmentation de la fluence laser de l'ablation laser dans un liquide. Le rapport Cu et S des nanoparticules préparées n'a pas été modifié. L’absorbance des nanoparticules de sulfure de cuivre préparées dans l’eau a augmenté avec l’augmentation de la fluence laser.
Kazuki ISODA
Tokyo Institute of Technology
Ryuga YANAGIHARA
Tokyo Institute of Technology
Yoshitaka KITAMOTO
Tokyo Institute of Technology
Masahiko HARA
Tokyo Institute of Technology
Hiroyuki WADA
Tokyo Institute of Technology
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copier
Kazuki ISODA, Ryuga YANAGIHARA, Yoshitaka KITAMOTO, Masahiko HARA, Hiroyuki WADA, "Preparation Copper Sulfide Nanoparticles by Laser Ablation in Liquid and Optical Properties" in IEICE TRANSACTIONS on Electronics,
vol. E104-C, no. 8, pp. 390-393, August 2021, doi: 10.1587/transele.2020ECS6027.
Abstract: Copper sulfide nanoparticles were successfully prepared by laser ablation in liquid. CuS powders in deionized water were irradiated with nanosecond-pulsed laser (Nd:YAG, SHG) to prepare nanoparticles. Prepared nanoparticles were investigated by scanning electron microscopy (SEM), dynamic light scattering (DLS) and fluorospectrometer. According to the results of SEM and DLS, the primary and secondary particle size was decreased with the increase in laser fluence of laser ablation in liquid. The ratio of Cu and S of prepared nanoparticles were not changed. The absorbance of prepared copper sulfide nanoparticles in water was increased with the increase in laser fluence.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.2020ECS6027/_p
Copier
@ARTICLE{e104-c_8_390,
author={Kazuki ISODA, Ryuga YANAGIHARA, Yoshitaka KITAMOTO, Masahiko HARA, Hiroyuki WADA, },
journal={IEICE TRANSACTIONS on Electronics},
title={Preparation Copper Sulfide Nanoparticles by Laser Ablation in Liquid and Optical Properties},
year={2021},
volume={E104-C},
number={8},
pages={390-393},
abstract={Copper sulfide nanoparticles were successfully prepared by laser ablation in liquid. CuS powders in deionized water were irradiated with nanosecond-pulsed laser (Nd:YAG, SHG) to prepare nanoparticles. Prepared nanoparticles were investigated by scanning electron microscopy (SEM), dynamic light scattering (DLS) and fluorospectrometer. According to the results of SEM and DLS, the primary and secondary particle size was decreased with the increase in laser fluence of laser ablation in liquid. The ratio of Cu and S of prepared nanoparticles were not changed. The absorbance of prepared copper sulfide nanoparticles in water was increased with the increase in laser fluence.},
keywords={},
doi={10.1587/transele.2020ECS6027},
ISSN={1745-1353},
month={August},}
Copier
TY - JOUR
TI - Preparation Copper Sulfide Nanoparticles by Laser Ablation in Liquid and Optical Properties
T2 - IEICE TRANSACTIONS on Electronics
SP - 390
EP - 393
AU - Kazuki ISODA
AU - Ryuga YANAGIHARA
AU - Yoshitaka KITAMOTO
AU - Masahiko HARA
AU - Hiroyuki WADA
PY - 2021
DO - 10.1587/transele.2020ECS6027
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E104-C
IS - 8
JA - IEICE TRANSACTIONS on Electronics
Y1 - August 2021
AB - Copper sulfide nanoparticles were successfully prepared by laser ablation in liquid. CuS powders in deionized water were irradiated with nanosecond-pulsed laser (Nd:YAG, SHG) to prepare nanoparticles. Prepared nanoparticles were investigated by scanning electron microscopy (SEM), dynamic light scattering (DLS) and fluorospectrometer. According to the results of SEM and DLS, the primary and secondary particle size was decreased with the increase in laser fluence of laser ablation in liquid. The ratio of Cu and S of prepared nanoparticles were not changed. The absorbance of prepared copper sulfide nanoparticles in water was increased with the increase in laser fluence.
ER -