The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Afin de construire de manière économique des réseaux d’accès optiques pour la fibre optique jusqu’au domicile (FTTH), il est important de réduire le coût d’installation des câbles à fibre optique. Les coûts de la fibre optique et du câble ont été réduits au cours des dix dernières années, mais peu de rapports font état d'une réduction des coûts d'installation. Dans cet article, nous décrivons la conception d'un câble à fibre optique haute densité qui réduit le temps d'installation requis. Pour y parvenir, nous avons réduit le poids du câble à fibre optique et le coefficient de frottement de la gaine du câble. Nous avons réduit le poids du câble en utilisant de la mousse de polyéthylène et un élément de résistance à la traction non métallique fabriqué à partir d'un nouveau matériau, le PBO. Ces deux approches réduisent le poids du câble d'environ 30 % au total. Nous avons également ajouté un lubrifiant à la gaine en polyéthylène de ce câble, ce qui a réduit de 30 à 50 % la force de traction requise pour le câble supplémentaire.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copier
Hideyuki IWATA, Shigeru TOMITA, "Optical Fiber Cable Design for Economical Installation" in IEICE TRANSACTIONS on Electronics,
vol. E85-C, no. 4, pp. 910-914, April 2002, doi: .
Abstract: In order to construct optical access networks economically for fiber to the home (FTTH), it is important to reduce the cost of optical fiber cable installation. Optical fiber and cable costs have been reduced over the past ten years, however there have been few reports describing installation cost reduction. In this paper, we describe the design of high-density optical fiber cable that reduces the required installation time. To achieve this we have reduced the optical fiber cable weight and the friction coefficient of the cable sheath. We reduced the cable weight by using polyethylene foam and a non-metallic tensile strength member made of a new material, PBO. These two approaches reduce the cable weight by a total of about 30%. We also added a lubricant to the polyethylene sheath of this cable and this reduced the pulling force required for the additional cable by 30%-50%.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e85-c_4_910/_p
Copier
@ARTICLE{e85-c_4_910,
author={Hideyuki IWATA, Shigeru TOMITA, },
journal={IEICE TRANSACTIONS on Electronics},
title={Optical Fiber Cable Design for Economical Installation},
year={2002},
volume={E85-C},
number={4},
pages={910-914},
abstract={In order to construct optical access networks economically for fiber to the home (FTTH), it is important to reduce the cost of optical fiber cable installation. Optical fiber and cable costs have been reduced over the past ten years, however there have been few reports describing installation cost reduction. In this paper, we describe the design of high-density optical fiber cable that reduces the required installation time. To achieve this we have reduced the optical fiber cable weight and the friction coefficient of the cable sheath. We reduced the cable weight by using polyethylene foam and a non-metallic tensile strength member made of a new material, PBO. These two approaches reduce the cable weight by a total of about 30%. We also added a lubricant to the polyethylene sheath of this cable and this reduced the pulling force required for the additional cable by 30%-50%.},
keywords={},
doi={},
ISSN={},
month={April},}
Copier
TY - JOUR
TI - Optical Fiber Cable Design for Economical Installation
T2 - IEICE TRANSACTIONS on Electronics
SP - 910
EP - 914
AU - Hideyuki IWATA
AU - Shigeru TOMITA
PY - 2002
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E85-C
IS - 4
JA - IEICE TRANSACTIONS on Electronics
Y1 - April 2002
AB - In order to construct optical access networks economically for fiber to the home (FTTH), it is important to reduce the cost of optical fiber cable installation. Optical fiber and cable costs have been reduced over the past ten years, however there have been few reports describing installation cost reduction. In this paper, we describe the design of high-density optical fiber cable that reduces the required installation time. To achieve this we have reduced the optical fiber cable weight and the friction coefficient of the cable sheath. We reduced the cable weight by using polyethylene foam and a non-metallic tensile strength member made of a new material, PBO. These two approaches reduce the cable weight by a total of about 30%. We also added a lubricant to the polyethylene sheath of this cable and this reduced the pulling force required for the additional cable by 30%-50%.
ER -