The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Les chambres réverbérantes (RC) sont largement utilisées dans le domaine des mesures électromagnétiques. Un RC est conçu pour avoir un long temps de réverbération, générer de nombreux modes et offrir une bonne uniformité de champ au sein de la chambre. Le but de cet article est de décrire le processus de conception et de mesure de la chambre réverbérante KRISS (KRC). Les modèles KRC de dimensions 4.5 m × 3.4 m × 2.8 m sont simulés par un logiciel de simulation numérique 3D. L'uniformité du champ et le coefficient de corrélation sont ensuite analysés à 200 MHz pour obtenir le modèle optimisé. Les résultats de simulation montrent de bonnes performances en termes d'uniformité de champ et sont confirmés par des mesures de 200 MHz à 1 GHz. La fréquence la plus basse utilisable (LUF) du KRC a été confirmée par l'uniformité du champ comme étant de 200 MHz. Cependant, les résultats du coefficient de corrélation de l'agitateur montrent de bonnes performances au-dessus de 300 MHz.
Aditia Nur BAKTI
University of Science and Technology
No-Weon KANG
Korea Research Institute of Standards and Science
Jae-Yong KWON
University of Science and Technology,Korea Research Institute of Standards and Science
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copier
Aditia Nur BAKTI, No-Weon KANG, Jae-Yong KWON, "Field Uniformity and Correlation Coefficient Analysis of KRISS Reverberation Chamber" in IEICE TRANSACTIONS on Communications,
vol. E101-B, no. 11, pp. 2289-2296, November 2018, doi: 10.1587/transcom.2017EBP3460.
Abstract: Reverberation chambers (RCs) are used widely in the electromagnetic measurement area. An RC is designed to have a long reverberation time, generate numerous modes, and provide good field uniformity within the chamber. The purpose of this paper is to describe the design process and measurement of the KRISS Reverberation Chamber (KRC). KRC models with 4.5m × 3.4m × 2.8m dimensions are simulated by 3D numerical simulation software. The field uniformity and correlation coefficient are then analyzed at 200MHz to obtain the optimized model. The simulation results show good performance in terms of field uniformity and are confirmed by measurement from 200MHz to 1GHz. The lowest usable frequency (LUF) of KRC was confirmed by field uniformity to be 200MHz. However, the stirrer correlation coefficient results show good performance above 300MHz.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.2017EBP3460/_p
Copier
@ARTICLE{e101-b_11_2289,
author={Aditia Nur BAKTI, No-Weon KANG, Jae-Yong KWON, },
journal={IEICE TRANSACTIONS on Communications},
title={Field Uniformity and Correlation Coefficient Analysis of KRISS Reverberation Chamber},
year={2018},
volume={E101-B},
number={11},
pages={2289-2296},
abstract={Reverberation chambers (RCs) are used widely in the electromagnetic measurement area. An RC is designed to have a long reverberation time, generate numerous modes, and provide good field uniformity within the chamber. The purpose of this paper is to describe the design process and measurement of the KRISS Reverberation Chamber (KRC). KRC models with 4.5m × 3.4m × 2.8m dimensions are simulated by 3D numerical simulation software. The field uniformity and correlation coefficient are then analyzed at 200MHz to obtain the optimized model. The simulation results show good performance in terms of field uniformity and are confirmed by measurement from 200MHz to 1GHz. The lowest usable frequency (LUF) of KRC was confirmed by field uniformity to be 200MHz. However, the stirrer correlation coefficient results show good performance above 300MHz.},
keywords={},
doi={10.1587/transcom.2017EBP3460},
ISSN={1745-1345},
month={November},}
Copier
TY - JOUR
TI - Field Uniformity and Correlation Coefficient Analysis of KRISS Reverberation Chamber
T2 - IEICE TRANSACTIONS on Communications
SP - 2289
EP - 2296
AU - Aditia Nur BAKTI
AU - No-Weon KANG
AU - Jae-Yong KWON
PY - 2018
DO - 10.1587/transcom.2017EBP3460
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E101-B
IS - 11
JA - IEICE TRANSACTIONS on Communications
Y1 - November 2018
AB - Reverberation chambers (RCs) are used widely in the electromagnetic measurement area. An RC is designed to have a long reverberation time, generate numerous modes, and provide good field uniformity within the chamber. The purpose of this paper is to describe the design process and measurement of the KRISS Reverberation Chamber (KRC). KRC models with 4.5m × 3.4m × 2.8m dimensions are simulated by 3D numerical simulation software. The field uniformity and correlation coefficient are then analyzed at 200MHz to obtain the optimized model. The simulation results show good performance in terms of field uniformity and are confirmed by measurement from 200MHz to 1GHz. The lowest usable frequency (LUF) of KRC was confirmed by field uniformity to be 200MHz. However, the stirrer correlation coefficient results show good performance above 300MHz.
ER -