The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Vues en texte intégral
119
Les antennes réseau légères à guide d'ondes à fentes monocouche sont fabriquées à partir de matériaux plastiques avec placage métallique. Un matériau plastique possédant de bonnes propriétés de rayonnement thermique est étudié. Trois types d'antennes sont fabriqués par fraisage, en utilisant de la résine ABS, du plastique rayonnant de chaleur et un alliage d'aluminium. Lors des mesures, il est confirmé que les trois types d'antennes ont presque le même ROS et le même gain dans la bande de fréquences de 25 GHz.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copier
Miao ZHANG, Jiro HIROKAWA, Makoto ANDO, "Fabrication of Alternating-Phase Fed Single-Layer Slotted Waveguide Arrays Using Plastic Materials with Metal-Plating" in IEICE TRANSACTIONS on Communications,
vol. E91-B, no. 8, pp. 2761-2763, August 2008, doi: 10.1093/ietcom/e91-b.8.2761.
Abstract: Lightweight single-layer slotted waveguide array antennas are fabricated using plastic materials with metal-plating. A plastic material that has good heat-radiation properties is investigated. Three types of antennas are fabricated by milling, using ABS resin, heat-radiating plastic, and aluminum alloy. In measurements, all three types of antennas are confirmed to have almost the same VSWR and gain in the 25 GHz frequency band.
URL: https://global.ieice.org/en_transactions/communications/10.1093/ietcom/e91-b.8.2761/_p
Copier
@ARTICLE{e91-b_8_2761,
author={Miao ZHANG, Jiro HIROKAWA, Makoto ANDO, },
journal={IEICE TRANSACTIONS on Communications},
title={Fabrication of Alternating-Phase Fed Single-Layer Slotted Waveguide Arrays Using Plastic Materials with Metal-Plating},
year={2008},
volume={E91-B},
number={8},
pages={2761-2763},
abstract={Lightweight single-layer slotted waveguide array antennas are fabricated using plastic materials with metal-plating. A plastic material that has good heat-radiation properties is investigated. Three types of antennas are fabricated by milling, using ABS resin, heat-radiating plastic, and aluminum alloy. In measurements, all three types of antennas are confirmed to have almost the same VSWR and gain in the 25 GHz frequency band.},
keywords={},
doi={10.1093/ietcom/e91-b.8.2761},
ISSN={1745-1345},
month={August},}
Copier
TY - JOUR
TI - Fabrication of Alternating-Phase Fed Single-Layer Slotted Waveguide Arrays Using Plastic Materials with Metal-Plating
T2 - IEICE TRANSACTIONS on Communications
SP - 2761
EP - 2763
AU - Miao ZHANG
AU - Jiro HIROKAWA
AU - Makoto ANDO
PY - 2008
DO - 10.1093/ietcom/e91-b.8.2761
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E91-B
IS - 8
JA - IEICE TRANSACTIONS on Communications
Y1 - August 2008
AB - Lightweight single-layer slotted waveguide array antennas are fabricated using plastic materials with metal-plating. A plastic material that has good heat-radiation properties is investigated. Three types of antennas are fabricated by milling, using ABS resin, heat-radiating plastic, and aluminum alloy. In measurements, all three types of antennas are confirmed to have almost the same VSWR and gain in the 25 GHz frequency band.
ER -