The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Cet article décrit un nouveau système de test de ligne de fibre optique fonctionnant à 1.65 µm utilisant des modules de dérivation de lumière de test. Nous montrons une nouvelle configuration de test pour les réseaux en anneau à multiplexeur ajout/suppression (ADM). Les modules de contournement de la lampe test ont été installés dans les bâtiments individuels des clients afin que la lampe test puisse contourner les ADM. Nous avons évalué les performances en matière d'erreur binaire avec un réseau en anneau ADM de 2.48832 Gbit/s à l'aide d'un prototype de module de dérivation de lumière de test. Nous avons confirmé que ce système de test peut surveiller les câbles à fibres optiques d'un réseau en anneau ADM et qu'il n'entraîne aucune dégradation de la qualité de transmission. Nous montrons la zone de fonctionnement fournie par la plage dynamique du système exprimée en termes de longueur de fibre et de numéro de bâtiment client. Le système prototype pourrait surveiller un réseau en anneau ADM reliant cinq bâtiments avec une boucle de 5 km. Nous avons également effectué un essai sur le terrain de surveillance en service dans un réseau en anneau de 2.6 km avec trois nœuds ADM. Ce système de test nous permet de réduire les coûts d'exploitation, d'administration et de maintenance et d'améliorer la qualité de transmission des réseaux en anneau ADM.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copier
Yoshitaka ENOMOTO, Hisashi IZUMITA, Nobuo TOMITA, "Optical Fiber Line Testing System Employing 1.65 µm Test Light Bypass Module for In-Service Monitoring of ADM Ring Networks" in IEICE TRANSACTIONS on Communications,
vol. E91-B, no. 8, pp. 2494-2500, August 2008, doi: 10.1093/ietcom/e91-b.8.2494.
Abstract: This paper describes a novel optical fiber line testing system operating at 1.65 µm using test light bypass modules. We show a new testing configuration for add/drop multiplexer (ADM) ring networks. The test light bypass modules were installed in individual customer buildings so the test light can bypass the ADMs. We evaluated the bit-error performance with a 2.48832 Gbit/s ADM ring network using a prototype test light bypass module. We confirmed that this testing system can monitor the optical fiber cables of an ADM ring network, and that it causes no degradation in transmission quality. We show the operating area provided by the system dynamic range expressed in terms of fiber length and customer building number. The prototype system could monitor an ADM ring network linking five buildings with a 5 km loop. We also performed an in-service monitoring field trial in a 2.6 km ring network with three ADM nodes. This testing system enables us to reduce the operating, administration, and maintenance cost and improves the transmission quality of ADM ring networks.
URL: https://global.ieice.org/en_transactions/communications/10.1093/ietcom/e91-b.8.2494/_p
Copier
@ARTICLE{e91-b_8_2494,
author={Yoshitaka ENOMOTO, Hisashi IZUMITA, Nobuo TOMITA, },
journal={IEICE TRANSACTIONS on Communications},
title={Optical Fiber Line Testing System Employing 1.65 µm Test Light Bypass Module for In-Service Monitoring of ADM Ring Networks},
year={2008},
volume={E91-B},
number={8},
pages={2494-2500},
abstract={This paper describes a novel optical fiber line testing system operating at 1.65 µm using test light bypass modules. We show a new testing configuration for add/drop multiplexer (ADM) ring networks. The test light bypass modules were installed in individual customer buildings so the test light can bypass the ADMs. We evaluated the bit-error performance with a 2.48832 Gbit/s ADM ring network using a prototype test light bypass module. We confirmed that this testing system can monitor the optical fiber cables of an ADM ring network, and that it causes no degradation in transmission quality. We show the operating area provided by the system dynamic range expressed in terms of fiber length and customer building number. The prototype system could monitor an ADM ring network linking five buildings with a 5 km loop. We also performed an in-service monitoring field trial in a 2.6 km ring network with three ADM nodes. This testing system enables us to reduce the operating, administration, and maintenance cost and improves the transmission quality of ADM ring networks.},
keywords={},
doi={10.1093/ietcom/e91-b.8.2494},
ISSN={1745-1345},
month={August},}
Copier
TY - JOUR
TI - Optical Fiber Line Testing System Employing 1.65 µm Test Light Bypass Module for In-Service Monitoring of ADM Ring Networks
T2 - IEICE TRANSACTIONS on Communications
SP - 2494
EP - 2500
AU - Yoshitaka ENOMOTO
AU - Hisashi IZUMITA
AU - Nobuo TOMITA
PY - 2008
DO - 10.1093/ietcom/e91-b.8.2494
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E91-B
IS - 8
JA - IEICE TRANSACTIONS on Communications
Y1 - August 2008
AB - This paper describes a novel optical fiber line testing system operating at 1.65 µm using test light bypass modules. We show a new testing configuration for add/drop multiplexer (ADM) ring networks. The test light bypass modules were installed in individual customer buildings so the test light can bypass the ADMs. We evaluated the bit-error performance with a 2.48832 Gbit/s ADM ring network using a prototype test light bypass module. We confirmed that this testing system can monitor the optical fiber cables of an ADM ring network, and that it causes no degradation in transmission quality. We show the operating area provided by the system dynamic range expressed in terms of fiber length and customer building number. The prototype system could monitor an ADM ring network linking five buildings with a 5 km loop. We also performed an in-service monitoring field trial in a 2.6 km ring network with three ADM nodes. This testing system enables us to reduce the operating, administration, and maintenance cost and improves the transmission quality of ADM ring networks.
ER -